TOCARO

 

 

Tocaro 50e

50 e

The Tocaro 50e is the culmination of all the knowledge and experience we have gained from all the lessons learned during the development and production of the Tocaro 40e series range of loudspeakers. In our efforts to provide the most authentic music reproduction, this new 15-inch drive-unit was created. The membrane is handcrafted in our own factory and its stability is achieved by the use of our unique impregnation system. The 15-inch-speaker is driven by a 1-inch voice coil and the timber feather. A precisely balanced spring-force-system and the specially produced basket of solid wood construction, allows this loudspeaker to work without an electric filter, a prerequisite of the Tocaro philosophy. This revolutionary new drive-unit, in conjunction with the two 10-inch drive-units and the 5-inch tweeter, combines to produce a really impressive sound.
Although larger, the cabinet, of beech and birch construction, is built like a Tocaro 45e, i.e. we couple an additional internal chamber with the front baffle of the loudspeaker. In doing so, we avoid intermediate layers and thereby allow the outer casing to resonate freely, in a comparable way to a large musical instrument.

 

Specifications:
Power Handling: 100 Watts, 2 Ohm (4 x 8 Ω)
Sensivity: 103 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 106 cm, width 66,5 cm, depth 44,5 cm
Measure stands:
height 45 cm, width 66,5 cm, depth 44,5 cm
Colours: natur, mahogany, dark brown, black, white

 

 

 

TOCARO 45e

45 e

The Tocaro 45e utilizes two 10-inch drive-units and the 5-inch tweeter. The membranes of these 10-inch drive-units are made from long-term stable cellulose-compound for which we use only our handmade material. This is also the basis for the Tocaro 40e series and the Tocaro 50e, as the sturdy aluminium die-cast basket and a powerful magnetization (1.3 Gauss) of the air gap. The timber feather suspension is employed again in the Tocaro 45e. The cabinets consist of an external and an internal chamber, so that both 10-inch drivers have got separated chambers. Each drive-unit has its own dedicated speaker sockets at the back of the cabinet, to allow for tri-wiring and single, bi, or even tri-amplification. They are made of cross-bonded beech and birch construction and the stands are also of solid beech construction.

 

Specifications:
Power Handling: 70 Watt, 3 Ohm (3 x 8 Ω)
Sensivity: 101 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 83,5 cm, width 45 cm, depth 33 cm
Measure stands:
height 45 cm, width 45 cm, depth 33 cm
Colours: natur, mahogany, dark brown, black, white

 

 

 

42 e

The Tocaro 42e combines two different drive-unit designs. On the one hand, the 10-inch drive-unit, with a membrane made from long-term stable cellulose-compound, which is controlled by a timber feather, just like the Tocaro 40e; on the other hand, the wooden tweeter, operating filter-free, whose membrane is of similar structure and construction to the timber feather. As both loudspeakers work without a filter, we achieve a very homogenous and dynamic musical presentation through phase-correct reproduction. Each drive-unit has its own dedicated speaker sockets at the back of the cabinet, to allow for both bi-wiring and single, or bi-amplification. The cabinets are of cross-bonded beech and birch construction. However, they are bigger than the Tocaro 40e, due to the additional tweeter. This enables a deeper coordinated cabinet resonance for the 10-inch main drive-unit. Consequently, it offers a wide range of tonal variation. The stands are also of massive beech construction.

Specifications:
Power Handling: 50 Watt, 4 Ohm (2 x 8 Ω)
Sensivity: 98 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 60 cm, width 35,7 cm, depth 26 cm
Measure stands:
height 47 cm, width 35,7 cm, depth 26 cm
Colours: natur, mahogany, dark brown, black, white

 

 

 

40 e

The Tocaro 40e consists of an 10-inch drive-unit with a membrane constructed from handmade cotton fibres. A complex impregnation process results in a long-term stable cellulose-compound. Seam and membrane are built out of one piece, not needing adhesive bond. The timber feather, made of special hardwood, aligns the membrane neck and voice coil. It controls decisively the drive pulse through static fixed coupling and rigidity. It is ready to lead low and high frequencies very clearly. The cabinets are of cross-bonded beech and birch construction and are furnished with special millings. The stands are also of solid beech construction and provide a stable connected platform.

 

Specifications:
Power Handling: 40 Watt, 8 Ohm
Sensivity: 97 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 44 cm, width 32,5 cm, depth 26 cm
Measure stands:
height 59 cm, width 32,5 cm, depth 26 cm
Colours: natur, mahogany, dark brown, black, white

 

 

 

30

The Tocaro 30 has got the identical 8-inch drive unit as the Tocaro 25 and this membrane is also impregnated with a special process. The difference is in the cabinet technology. The cabinets consist of cross-bonded beech and birch wood, just like the bigger models. The precisely manufactured tongue and groove joints guarantee high stability, as do the mortised stands of solid beech construction. Both loudspeakers, the Tocaro 25 and Tocaro 30, work with a 1-inch voice coil made from capton. The insulating material, which avoids reflections, is extremely porous and accurately dimensioned. No electrical filter is necessary due to the high rigidity and low mass of the membrane. This results in a perfectly timed and dynamically precise reproduction.

 

Specifications:
Power Handling: 30 Watt, 8 Ohm
Sensivity: 94 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 41,5 cm, width 29,5 cm, depth 24,5 cm
Measure stands:
height 55,5 cm, width 29,5 cm, depth 24,5 cm
Colours: natur, mahogany, dark brown, black, white

 

 

 

25

The Tocaro 25 has all the essential characteristics of the Tocaro sound philosophy. It is equipped with an 8-inch drive-unit and goes through the same special impregnation process, which is used for the Tocaro 40e series and the Tocaro 50e. By using this process, we achieve high rigidity and long-term stability. Seam and membrane are built out of one piece, not needing adhesive bond. These are the basic prerequisites of the typical Tocaro sound. As well as manufacturing an instrument, we use only cross-bonded and massive wood construction, no chipboard or MDF panel is employed. Accordingly, the floor-standing cabinet is made out of birch plywood. The ventilation tunnel is made out of solid beech plywood, in the same way as all other Tocaro loudspeakers.

 

Specifications:
Power Handling: 30 Watt, 8 Ohm
Sensivity: 94 dB
Broadband loudspeaker which works filter free
Measure loudspeaker:
height 95 cm, width 24,5 cm, depth 26,5 cm
Colours: black, white

© 2017 MFJ Audiovertrieb UG